3.42 gears to ? 6" lift and 35" tires

[5spd Z71]

I'm planning 4.56 gears with the 35's I just bought.


Sent from my iPhone

 

[Andyvr4]

You must be registered for see images attach

Chart say that for 30.4 tires and 3.42 is factory then for 35" is 3.93 gears so that would be 4.10s or am I missing something?

 

[thz71]

You must be registered for see images attach

Chart say that for 30.4 tires and 3.42 is factory then for 35" is 3.93 gears so that would be 4.10s or am I missing something?

Can't read that chart. If you want 4.10s that should be fine.

 

[Andyvr4]

http://www.therangerstation.com/tech_library/gearandtirechart.shtml

 

[thz71]

http://www.therangerstation.com/tech_library/gearandtirechart.shtml

Either way my recommendation is 4.56s. These trucks are dogs stock with 3.42s.

 

[21Actual]

Either way my recommendation is 4.56s. These trucks are dogs stock with 3.42s.

I can vouch for that. My winter beater with the 3:42's isnt winning any races with the 31's I have on her.

 

[98sierra4x4]

I like my 3.73s with 31s. So 4.56 is probably best with 35s


Sent from my 5.7 Vortec powered iPhone 5S using Tapatalk.

 

[TylerZ281500]

4.10s is minimum youll be slow off the line but youll gain that back in top speed, 4,56s would act as though stock, good off the line good highway cruising, if you go taller than that 4.88,5.13,6.32 youll end up losing top mph