Too bad we aren’t closer, I’ve got at least three within line of site right now and know where 3 more are in the barnA rock taped to some mechanics wire will have to work here.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Too bad we aren’t closer, I’ve got at least three within line of site right now and know where 3 more are in the barnA rock taped to some mechanics wire will have to work here.
Sorry, stands. No need to remove anything. I like the mushroom style small bumpstops, the bigger ones limit travel too soon.Remove suspension load as in removing the leaves? Or just place the truck on stands on the frame? I saw a video from Reklez where they installed it without removing any suspension components.
xc_hide_links_from_guests_guests_error_hide_media
Additionally: someone recommend me some bump stops. I don’t like the Belltech ones. They look wimpy.
Super 10 sounds good but they drone on the highway...I am ready for these notches to be installed this week. Frame is cleaned up, it’s centered, they are straight.
You must be registered for see images attach
I am going to have the fabricator weld the axle breather/brake line bracket to the notch. That way it is close to its original location.
Hopefully this weekend I can get the axle out. Need to order my gear oil, cover, gasket, and brake kit… and fuel lines, brake lines. I think that’s it for now
I can’t wait to get rid of the terrible walker muffler and dual tailpipes. They aren’t bent right so they angle down too much at the exit. The stock muffler without the converter sounds terrible. I am going to run a single in/dual out Super 10.
My ‘92 doesn’t have any drone. Maybe I just don’t notice it.Super 10 sounds good but they drone on the highway...