Wow, your bumpers must be crazy heavy. Mine is at 41" last time I checked.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wow, your bumpers must be crazy heavy. Mine is at 41" last time I checked.
Yeah I am running 5 leafs and an overload with the 4" block. I am just about cranked all the way just to get as close to level as possible but I am pretty sure my front bumper has a lot to with that! I am running 305s and I can't wait to get some 315s to fill out the wheel wells a lot more. You can see the wheel well difference in the pictures. I think you will be alright with the leaf springs and a two inch block!
This was the day I did the swap and I had about an inch or so of Cali Lean with just the four inch block
You must be registered for see images attach
This was today cranked basically level. Before I cranked it all the way to get it more level I had an obvious amount of rake that drove me crazy and it was right at 42 1/2 inches out back.
You must be registered for see images attach
Wow, your bumpers must be crazy heavy. Mine is at 41" last time I checked.
Or your tires are that much bigger.
Or your tires are that much bigger.
we are both on 305/70's I thought.....
yours are mudders, deeper tread. When ordering a tire it'll say "diameter" which will vary a lot from tire to tire. And as you've seen, he's hauled a lot more weight with his truck so his springs probably ARE a little more broke in.
wait are we talking fender heights cause im at 4inches of lift on 43inches to my fender.
wait are we talking fender heights cause im at 4inches of lift on 43inches to my fender.