Hey Kyle, so what is your set up right now? 3/4 leafs (5 packs + 1 overload) w/ 4" block fully cranked on 305 or what? Just trying to figure out if my plans are going to be high enough.... 2" block with 3/4 leafs (5 packs + 1 overload) for 315's.
One more thing- did you happen to measure exactly how much lift you got?
Yeah I am running 5 leafs and an overload with the 4" block. I am just about cranked all the way just to get as close to level as possible but I am pretty sure my front bumper has a lot to with that! I am running 305s and I can't wait to get some 315s to fill out the wheel wells a lot more. You can see the wheel well difference in the pictures. I think you will be alright with the leaf springs and a two inch block!
This was the day I did the swap and I had about an inch or so of Cali Lean with just the four inch block
You must be registered for see images attach
This was today cranked basically level. Before I cranked it all the way to get it more level I had an obvious amount of rake that drove me crazy and it was right at 42 1/2 inches out back.
You must be registered for see images attach