Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
was basically only looking to level the truck and clear a 33x12.50 on a 20x12 wheel or maybe a 22x14 and im ok with trimming on the bumper and fender....Just heard nothing but bad things about the spring spacers (ride terrible?, hard to align, etc) so was looking for a spindle lift but have found nothing and was hoping someone had run into the same problemHow high are you looking to go? You could always do a coil spring spacer up front, a small lift block in the rear and a 3" body lift to get maybe 5" or 6" of overall lift.
Question:
will this fit 1991 chevy c2500 8 lug
Answer:
No these will not fit on the 8 lug models. We may have some 8 lug spindles coming but nothing is available yet
lol thats definitely an ideaYou're right on both those parts about spring spacers. I'm curious if you could throw a set of 3500 coil springs up front to squeeze a little more lift up front but I doubt it. If you really wanted it level, you could throw a set of 2" lowering shackles in the rear to level it out and then body lift it 3" and trim for the 33s. Kind of counter productive, but it'll be level lol.
Maybe some lifted C2500/C3500 guys can get in here and help you out better than I can though.