Mike P
Newbie
New member and first time posting on the forum so I apologize if this is too long. So I blew up my 10 bolt a few months ago, so we swapped in a 14bsf. I ended up doing a bunch of front end work and took it to work to get it aligned and it went all down hill from there. We use a brand new Hunter WA470 machine at the dealer I work at and all the specs showed good after the alignment. Took the truck for a test ride and the toe was is so bad I could barely control the truck. My question is, is the 14bsf and 10 bolt different widths from drum to drum. I scrapped the 10 bolt months ago so I cant compare anymore. My thinking behind this is that the alignment machine is trying to align the front tires up with the rear (previously a 10 bolt), but maybe the 14bsf is wider and that's were the machine is getting confused? Anyone have this issue or any advice on this problem. Thanks in advance