Search results

  1. cjman250

    Junction block wiring breakdown?

    Does anybody have a clear breakdown on which wires on the junction block on the fire wall are for a 93? Im having some electrical issues and want to see the layout for the wiring but can’t find any clear diagrams. TIA
  2. cjman250

    Zq8 steering box?

    I searched but couldn’t find a thread about this when using the search but, I’m looking at steering boxes and wondered if anyone has put a zq8 (sport package) steering box on a truck without having that package? And if so did it make any difference or would it be a waste of time?
  3. cjman250

    Random Missfire Issues

    Ive have a 93 c1500 with a 350 and keep having issues with random fits where my truck will start missing while driving down the road or sitting at a stop light it will miss and then stall out. I have no check engine lights but I hooked up a scanner to it at O'reilly's and it had a pending code...
  4. cjman250

    I wanna hear your exhaust set up!

    Looking to completely change my exhaust up on my 93 with a 350. Cant decide if I want short or long tube headers, or what mufflers I want (been looking at flowmaster) but I plan on doing no cats. let me hear what you have!
  5. cjman250

    88-94 Split bench swap to buckets and console?

    I have a 93 ext cab with the split bench and was wondering if id be able to swap to either buckets with a center console from 88-94 or the 95-98 split bench with a fold up console without too much modifications?
  6. cjman250

    Running issues

    So my truck is acting weird and I'm not sure what it is. It's been dying randomly at stoplights and when I'm giving it gas sometimes it feels like it's not responding to throttle and then sometimes it feels like it's bucking until I floor it. When I floor it or let off and then get back on it...
  7. cjman250

    Wanting straight pipes on my 93

    Looking at maybe doing cat back dual straight pipes on my truck and was wanting some opinions on what size pipes and tips to run to sound good and healthy. Wanting to exit next to the hitch. I have 3 inch pipe after the cat going into my current muffler. If you have any videos I'd love to see...
  8. cjman250

    Stuck Ignition

    My ignition is getting stuck and I'm not sure why. It doesn't happen everytime but it's been happening alot lately to the point im having to umbolting the ignition switch and starting with a screwdriver. The ignition turns fine without the switch hooked up and the switch doesn't seem to be hard...
  9. cjman250

    Odometer not working

    So my odometer is stuck and I was wondering if anyone could help. It seem to have stopped when the po reset the trip on it as it's at 0. So I'm wondering, is something out of place causing it not to work or if a stepper motor is bad? Truck is 1993 c1500 with the tach cluster
  10. cjman250

    Review: Rockford Fosgate P300-12 Punch powered subwoofer

    I recently ordered a Rockford Fosgate P300-12 Punch powered subwoofer for my 93 ECSB and wanted to write a review for anyone interested in getting some bass in their truck without the cost and separate pieces of building your own system. My first impression when I pulled it out of the box is...
  11. cjman250

    Camber correction bolts help

    I took my truck to the shop for ball joints and an alignment after I put my lift on and they told me I need new camber correction bolts to get my camber fully adjusted but got it as close as they could for the time being. My question is how hard are these to replace and how because they quoted...
  12. cjman250

    not a 400 but i want it!

    http://atlanta.craigslist.org/atl/cto/4798226082.html 6.0 vortec, manual trans, lifted and badass
  13. cjman250

    Dealings with installing Rough Country 4 inch lift spindles for your 2wd GMT400

    First off i would like to say that this kit is not exactly as "bolt on" as it sounds. It required a lot more grinding than the instructions that came with it did. I had to grind off a corner on both dust shields in order for them to seat properly. I also had to grind the passenger side spindle...
  14. cjman250

    Rough Country tapered blocks.

    Does anyone know which way a tapered block goes on? Is it the angled part going up or down?
  15. cjman250

    can someone photoshop some 17x9 fuel lethals on to my truck please?

    as the title says, can anyone chop some fuel lethals on my truck please? Can you also put a little bit of lift on it too please? Thanks i appreciate the help. My truck: Wheels:
  16. cjman250

    Anyone Ever Heard of or Used CST Suspension parts (Chassis Tech Systems)

    I am looking at 4in Spindle lifts for my '93 C1500 and was wondering if anyone has bought anything from or dealt with Chassis Tech Systems before? Lift in question is...
  17. cjman250

    Muffler Question

    Im looking at getting new mufflers and was wondering if the inlet/outlet size had any effect on loudness. my current muffler is 3"in/2.5" out and was wondering if i should buy a muffler that has a 3in diameter or 2.5?
  18. cjman250

    Help me choose some wheels

    I'm looking for people's opinions on what kind of wheels I should get for my truck. Prefer black and looking for 17" or 18". Thanks yall
  19. cjman250

    93 4L60e problems occurring irregularly

    Truck is a 93 2wd ECSB 350/4L60e problem i am having is that sometime when my tranny goes into OD, when i let off of the gas, it feels like its jumping. Feels almost like my truck is getting rear ended over and over again. Stops doing when i shift out of OD. It doesnt always happen though...
  20. cjman250

    95 Z71 on 35's

    http://atlanta.craigslist.org/atl/cto/4525219454.html for anyone in GA, my buddies old truck is for sale. Has brand new 6" Procomp suspension lift 3" body lift new paint. 20" moto metal wheels (less than a month old) decent tread 35's new owner put new motor and tranny in it...
  21. cjman250

    Trying to stall at idle

    My dad's 98 ecsb with a 350 is trying to stall at idle after warming up. He went out of town and it was fine before it sat for two days. Only does it like at every other stop light or so. Has new motor, dist, plugs, wires, cap, rotor, injection spider. Any ideas? Could it just be iac? Truck has...
  22. cjman250

    454 TBI work on 350?

    basically what the title says, will a 454 tbi unit fit on a 350?
  23. cjman250

    Holley TBI

    does anyone have one or know if they are worth getting? engine i would put it on is 350 tbi
  24. cjman250

    1993 GMC Sierra ECSB C1500 Build

    Decided to make a (what will probably be very slow) build thread for my truck. I got my 1993 GMC Sierra back in September of 2012 for my 16th Birthday present. Currently done: Dropped in a reman 350 bored .30 new driver side arm rest passenger window motor tinted taillights led taillight bar...
  25. cjman250

    just a little chopping

    can someone please shop a 4in rcx spindle lift, these wheels and tires, a cowl hood and possibly a color change?

Latest posts

Members online

... and 13 more.
Total: 1,914 (members: 63, guests: 1,851)

Forum statistics

Threads
64,383
Messages
1,392,680
Members
51,533
Latest member
chevycowboys

Share this page

Top