Search results

  1. flyboy1294

    What the heck? One subwoofer is louder than 2?

    Hey guys, here is my situation: I have a Boston Acoustics GTA-1105 amp (http://www.crutchfield.com/p_065GTA1105/Boston-Acoustics-GTA-1105.html?tp=35808). It is suppose to be able to put out 400RMS at 2ohms on 1 channel. My old setup was a Kicker CVR10 with 4 ohm dual voice coils wired in...
  2. flyboy1294

    Kicker ZX 250.2 amp for sale.

    Hey guys, I have a Kicker ZX250.2 amp. It works great and could power a small system with ease. It has 2 channels that are bridgeable. It runs 2 channels @ 2ohms with 125 RMS each, or 1 channel bridged @ 4ohms with 250 RMS. Also has lots of cool features like bass boost, cross over adjustment...
  3. flyboy1294

    Do they make a thing like this for our trucks?

    I'm not even sure how to describe it. Attached is a pic of what I'm talking about. It would be cool if it said 'Chevrolet' or 'Silverado' or something of that nature. I don't know even where to begin to look haha. Here is where I got the pic from...
  4. flyboy1294

    P0452 OBD2 code?

    Hey guys, Over the past few months, I have noticed my engine light coming on periodically. One by one I have tracked down the individual causes and fixed them. It was never anything too bad, just little stuff like bad 02 sensors, cracks in vacuum hoses, etc. Anyway, lately I have had the...
  5. flyboy1294

    Jensen Kdc9520 4 channel headunit + wiring harness, antenna adapter, and dash kit.

    Hey guys, Up for sale I have this Jensen radio. It has all the basics, nothing fancy. AM/FM radio, CD player and cassette. This head unit is rated at 40watts X 4 channels. It also has amp out puts in the wiring harness for the rear channels. This was installed by an audio shop near Top Sail...
  6. flyboy1294

    CS130D 105A Alternator + belt

    Hey guys, I have a CS130D 105 amp alternator off of my 1998 Chevy. I got the alt brand new in September 2011. It has had about 600 miles on it since then, if even that much. I upgraded to a 140A alternator, so I no longer need this one. I'll also throw in the belt free of charge since it will...
  7. flyboy1294

    False error code

    Since I got my Black Bear tune my SES light has been periodically coming on. I had a mechanic hook a scan tool to it and it came back as a bad coolant temp sensor causing the truck to run rich/lean. Well on the way home from the shop after having that replaced, the light came on again. This time...
  8. flyboy1294

    Lean 02 sensor reading

    Recently, I was driving down the road and my SES light came on. Seeing it, I was concerned and checked everything out once I got to my destination. Nothing was apparently wrong, so I got some fuel and unhooked my battery cable for a few minutes and cleared the code. On the drive back home, the...
  9. flyboy1294

    WTB or WTT: interior parts (Seats and a switch)

    All parts are for a 98 k1500 *I need a door jam switch for the drivers side. (It controls the courtesy lights and the open door alarm. *I also may need a horn switch. Not the airbag, just the switch part. *Now, I am interested in bucket seats and a console, but I am not sure how much...
  10. flyboy1294

    Preserving your daily driver

    I searched around and couldn't really find a thread about how everyone maintained their DD. I figured if anyone had any great tips about maintenance, they could post it here. I have been commuting from college to home to work on the weekends for a bit under a year now. Since my GMT400 has...
  11. flyboy1294

    Fender Flares

    I am looking for a set of flares for my '98. I love my new aggressive stance but I resent getting pelted by rocks. I think the OEM style flares would be the best for my truck. With that said, what are your experiences with the eBay flares? Are they worth investing in or should I save up the...
  12. flyboy1294

    Bed Liner on the frame

    Even though I don't have a body lift, I can still see my frame some. I have it pretty dang clean (gas pressure washer + degreaser FTW), but there are a few patches that are somewhat rusty. I have been thinking about putting some Heculiner or something similar on the frame to keep it from...
  13. flyboy1294

    Writeup: Installing 5.7 TBI headers on 5.7 Vortec

    A quick Google search will yield countless results about trying to use TBI headers on a Vortec engine. About half of them say it is possible and about half say it will never work. As you may already know, Vortec shorty headers are almost double the price of TBI headers. In addition to this, you...
  14. flyboy1294

    All around budget sound setup

    ... and I know this may be a dead horse. I did a search and everyone situation seemed slightly different than mine, so I made a thread. Don't hate too hard, please. Anyway, here is my situation. I would like to build a decent system for my '98 extended cab. I listen to a variety of music, but...
  15. flyboy1294

    88-98 stock parts (Lights, Corners, exhaust stuff)

    Hey guys, I have a few stock parts someone may be interested in. I am not really looking to make money, just clean out the garage, so prices will be low. If you are interested in any parts, just shoot me a message. **All parts are from a 96-98 body style Chevy k1500 w/ 5.7 Vortec** * 3 Stock...
  16. flyboy1294

    CASE learn or crank relearn

    Hey guys. A few weeks ago, I ordered a Blackbear Performance tune for my truck. It arrived just a few days ago. Anyway, I installed the new PCM and had to perform security re-learn as the directions included said I would. It all went off without a hitch. However, my check engine light did...
  17. flyboy1294

    Removing horn pad?

    Is there any specific trick to remove the horn pad? Does it just pop off or are there clips holding it? I am exceptionally wary because of the airbag in there... (My horn switch has broken in the pad part, and I would like to replace it.)
  18. flyboy1294

    Reworking my exhaust (CAT suggestions, pipe diameter questions)

    Here is the deal: I have a 98' k1500 with the 350 Vortec. As of right now, it has dual Flowmaster Super 44 turndowns on it. I purchased some Hooker Long Tube headers for it, and am totally reworking my exhaust from the headers back because of this. 1). My stock cats are rattling, so they...
  19. flyboy1294

    EGR delete

    I have asked in another thread, but I figured I figured I would make a new one to not hijack. Anyway, I have a Vortec 350, and I do not have to meet emissions. I am disabling my EGR system. Will I need an EGR block off plate? I already have new headers that do not have the EGR tube, so I am...
  20. flyboy1294

    Headers on the 5.7 Vortec

    I am looking to purchase a set of shorties to go with a BBP tune for my '98. With that said, what are the brands to use/stay away from? I have heard good things about Gibson and Thorley, and mixed responses about Edelbrock. Also, are these going to include the 02 sensor mount up and the...
  21. flyboy1294

    Tinting corners

    I searched and could not find a thread about this, so I figured I would ask. Sorry if I missed something. I am redoing my grille and lights, and would like to tint my stock corners some. Not blacked all the way out, but darker than stock. My problem is that I am limited to using rattle can...
  22. flyboy1294

    Elegante's at Stylin' Trucks?

    Alright, I just got my pay check for the week and I am ready to buy myself a set of Elegantes for my Chevy. I am having some trouble finding these though. Here is the link I found for the headlights: http://www.stylintrucks.com/parts/clear_headlights/3155/elegante80-6227-01-.aspx Here...
  23. flyboy1294

    My 1998 K1500

    I posted this in the off-road build section, but I am looking for your alls feedback, so I will post it here also. This is the progress of the truck since I got it until now. Suggestions are welcome and needed. :help: ______ Let me start by saying that I am a total noob on here. I am in...
  24. flyboy1294

    My '98 Chevy

    Let me start by saying that I am a total noob on here. I am in college and make money during the summer, so my budget is unbelievably limited. My "build" is put to shame by literally every other thread in this forum, but I figured I'd show you all what I was doing with the truck anyway. :) So...
  25. flyboy1294

    5.7L Cold Air Intakes?

    I searched but found little to no information. What are your thoughts on these? I have a 1998 k1500 daily driver. It has the 5.7L Vortec in it. Over the past year since I got it, I have slowly been upgrading things during the summers when I can work and make some money (college student.)...

Latest posts

Staff online

Members online

Total: 1,043 (members: 9, guests: 1,034)

Forum statistics

Threads
64,476
Messages
1,394,737
Members
51,755
Latest member
GriffisClnCo

Share this page

Top