Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It takes one, to know one!Nice work, as always.
After getting my butt whooped by the front diff, I didn’t have much to do since the frame and a bunch of other things are at the sandblaster, so I started taking my old 46mm throttle body apart to get the injectors out. I’m sending them to MRP fuel injection for a thorough cleaning.
The new setup will be:
50mm sbc throttle body.
Matched 5.7 injectors.
Adjustable regulator.
Injector pod spacer.
CFM Tech fuel gauge adapter with Summit 30# gauge.
CFM Tech phenolic spacer bored to 50mm.
Edelbrock TBI intake bored to 50mm.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Thank you and you're welcome. It's about to get really good.This thread is awesome! Thank you for sharing you and your son's build.
They do take amazing photos, but look through this forum and the astounding amount of burry, uncropped, unfocused, context… I agree though, it doesn’t take that much effort for a good quality picture.Thanks everyone for the compliments, we'll try to keep up the good work and pictures.
@roadtrip the credit for the photos has to go to Apple.