You can change pulleys to make your belt fit. I snagged every size pulley i could find at the junkyard years ago. You may need to change more than 1 though. i had 3 Ad244 alts on my 5.7 and i ran 2 of them when i 1st LS swapped my truck. I used to build my own alternators when i was into car...
I run 20x8's up front with a 5" + drop and and have daily for 10 years have tried Many sizes and tires.....it used to be next to impossible to find but now a few cars suvs come with Porsche Cayenne and the Camaro SS. if you have the stock under fenders 245/40-20 was over the best size. Make...
I was planning to weld in corners when I was doing body work but went the easy way out and used fiberglass hairs after removing the rust. Then sanded, filler, ....you know the rest.
Water got in from my ext cab windows not sealing up completely and rusted mine out. There is some sound deadening...
I have an ext cab with 2”spindles 3” springs front with belltech nitro drop2
Rear has a cheap notch and shackles with leaf packs from a 1-ton. Cheap Gabriel air-shocks for a 79 caprice wagon with Shock extenders. This setup was perfect when I had 2600lbs of car audio installed. It sucks with no...
You keep the computer from the 93 in the truck to power the transmission. It only needs the power wire which is pink one that runs to the big round plug on the passenger side.
I’m interested in something like that. Don’t want to cut my bed up ( I know the under bed supports will need cut ). I have an OBS ext cab. What type of steel is used and what welder do you prefer to install?
I have installed the seats from a 2014 Silverado seats in my OBS and I currently have 2017 Chevy Trax seats in my OBS. The 2014 seats require putting new holes in the floor for mounting. If you don’t do a little fab work they will sit closer to the doors ( The distance between them is greater )...