My RPM needle does the same thing. It will bounce about 200 rpm when going highway speeds. I was told it wasnt worth digging into.
The Stupid Interior Questions Thread
- Thread starter Mike
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
My RPM needle does the same thing. It will bounce about 200 rpm when going highway speeds. I was told it wasnt worth digging into.
roost 'er
Newbie
- Joined
- Aug 6, 2011
- Messages
- 8
- Reaction score
- 0
Anyone know the best place to get a bench seat cover for a 1997 Sierra?
sewlow
Bitchin' Stitchin'
Are you asking about a factory style seat 'skin', or a seat cover, 'seat cover'? (al a Walmart) If the second, why? As an upholstery guy, it figures that I wouldn't like 'em. They always move around, the attachment system is lousy, & any dirt trapped between the seat & the cover will make your seats wear out faster.
roost 'er
Newbie
- Joined
- Aug 6, 2011
- Messages
- 8
- Reaction score
- 0
Factory style skin i believe is what im looking for. Stock skin has a hole in it right at the drivers side and im gearing up to list the truck for sale so trying to fix odd and ends.
As upholstery guy would it be cheaper to buy a replacement skin or get the top fabric fixed? Thanks
sewlow
Bitchin' Stitchin'
If the uphol. guy near you has a matching material in stock, it would cost somewhere around $75.00. That's what I would charge, & that's without seeing it. If he has to order in some material, then it'll be more. Most shops don't like to order less than 1/2 a yard. You probably need a third of that or less. Sounds like a typical worn-out outside edge.
roost 'er
Newbie
- Joined
- Aug 6, 2011
- Messages
- 8
- Reaction score
- 0
Alright thanks. Only downside is truck currently is off road so cant get it to interior guy easily may look at junkyard for depends how easy it is to put new skin on
eric.s.t
Stroked
Hey,
im new to this site, and the reason being was because im doing a power windows and lock conversion with OEM harness. Now i got a 1990 c1500 sport edition, and i got a a silverado part truck . i took the harness out, but cant seem to find the releys. I seen on the other threa about the conversion that 1900's didnt have reley? is thta true? can i connect these with out them? or not? im scared to try. any one have a diagram kicking around they can send me?
hope you can help
im new to this site, and the reason being was because im doing a power windows and lock conversion with OEM harness. Now i got a 1990 c1500 sport edition, and i got a a silverado part truck . i took the harness out, but cant seem to find the releys. I seen on the other threa about the conversion that 1900's didnt have reley? is thta true? can i connect these with out them? or not? im scared to try. any one have a diagram kicking around they can send me?
hope you can help
I asked this in the audio thread but thought I would add here also. Taking out the jack under the rear seat so I can install a subwoofer box. The jack box is not coming out without a fight. I took a bolt out on the right side but the box will not come out. Spin nut off the top and bolt out of the right side - what am I missing??? Tried pulling, prying and kicking (!) but nothing has working so far. Suggestions?
RHamill
Ryan
Isnt there some sort of square nut you gotta take off from underneath the truck? Take a gander under there and see.
my relay was in arround the cluster area behind the dash neer the steering colum, mounted beside the remote lock module thhing,, just chase the wires and youll find it, i just did this swap in my 98 pw/pl
