Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
no...the frame should be notched for anything 6" (sometimes 5") and lower. Im sure your probably bottoming out like crazy if your actually at 6"
You can go three more inches, or you could weld the axle straight to the frame. Might ride a lil rough tho. J/k look at AVS for there"under bed C-notch". Hard to believe they put a copy kit on and no C-notch
Notch the bed brace that's over the axle if you do the frame notch, rear end kisses the brace when bottoming out