GMT-400 truck small parts galore.....bolts,brackets,tow hooks..mirrors,hubcaps,ect...

[Cokeman95]

if you need a fleetside bed..and can pick it up..I get them all the time..from atlanta and charlotte no rust beds.

How much would one be?

 

[okiemudslinger]

I need for my 95 Tahoe a gray 3 outlets and ashtray assembly my will not stay closed and someone drilled holes in it to mount a CB to it.

Oh by the way the Washer tank I got from you a couple of months ago leaks as bad as the one I replaced.

 

[GREY99HOE]

I need for my 95 Tahoe a gray 3 outlets and ashtray assembly my will not stay closed and someone drilled holes in it to mount a CB to it.

Oh by the way the Washer tank I got from you a couple of months ago leaks as bad as the one I replaced.

Let me make sure i have one..and i will make that 95 only washer bottle right for you..I do not have a 95 here..but can get one or take some off something else..sorry about that..and that truck was hit on the left fender..

 

[GREY99HOE]

How much would one be?

between $300-$500 for nice short fleetside bed depending on how much i have to pay for good parts truck..

 

[Cokeman95]

That sounds reasonable. I would need a long bed fleet side so I assume it would be more. I'm down that way occasionally. If I have the extra cash next time I'll get with you.

 

[okiemudslinger]

Let me make sure i have one..and i will make that 95 only washer bottle right for you..I do not have a 95 here..but can get one or take some off something else..sorry about that..and that truck was hit on the left fender..

I it's ok if you can't fine one but it would be nice to be able to wash the windshield. How much for the ash tray assembly if you have on?

 

[mason dixon]

Still need all the wiring for under the dash of my 98 z71. Mouse ate wiring with previous owner. Dont want to tear it apart and find out im missing one piece i need so i want all the wiring. Has the floor shift 4wd. Just jacked it up to find out what wrog woth front end; needs both lower ball joints. shop here wants 559$. Any body have any ideas on replacing them myself. looked at youtube, looks like ill need more tools than i have

 

[Sampuppy1]

Still need all the wiring for under the dash of my 98 z71. Mouse ate wiring with previous owner. Dont want to tear it apart and find out im missing one piece i need so i want all the wiring. Has the floor shift 4wd. Just jacked it up to find out what wrog woth front end; needs both lower ball joints. shop here wants 559$. Any body have any ideas on replacing them myself. looked at youtube, looks like ill need more tools than i have

Ball joints you need a good impact gun some impact sockets and a grinder and cold punches for stock ball joints. The press can be had anywhere that rents tools. Autozone etc. other than that the only special tool is a 36?mm socket for the axle nut if its a 4x4. Never done 2
Wheel drives.

 

[bdubyah]

Do you have a set of 95+ mirrors in good shape? I also could use a couple of the metal tabs that the grille and filler pieces screw into that clip into the core support.

If so, let me know a price shipped to 38469. Thanks.

 

[barnwood]

any gray oem floor mats