You must be registered for see images attach
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You must be registered for see images attach
You must be registered for see images attach
I have a feeling this meme is saved in a special folder in your phone…You must be registered for see images attach
(I forgot if my name is on my profile stats that show up or not, but my name is taylor)
You must be registered for see images attach
(I forgot if my name is on my profile stats that show up or not, but my name is taylor)
They have been tested well over the years. In stock form they give a decent torque boost from about 2,500-3,900 with peak runner tuning effect at 3,200. On both ends of the rpm range I quoted, they fall on their face.I’ve heard the tpi’s were pretty terrible, but in the name of data acquisition I still think it would be worth testing and comparing.
not special but its also on my computer, not a phone lolI have a feeling this meme is saved in a special folder in your phone…
Not to mention that the Engine Masters guys are disappointed whenever they have to dyno anything that makes less than 500 hp. I absolutely believe the TPI intakes and Vortec cams were weaksauce, but it was the best at the time. Our trucks were born in an era where 200 hp was "big" power to most people. There's no need to dyno this stuff, it's been done many times before and it's only depressing. We know that if you want to make more power you need to tackle it as a package and upgrade everything.Stock TPI would be a complete waste of time, coming from someone that ran one. FiTech or Sniper TBI would also be a waste of time on a stock Vortec. The choke point on a Vortec is the stock exhaust manifolds and tiny exhaust pipes on the 1/2 ton tucks followed closely by the stock camshaft.
...just ask Senile Joe and ComeAllYa.It's only a border if you allow it to be so.
Hey! Uncle Joe is doing the best he can. See how he’s lowering gas prices for us?...just ask Senile Joe and ComeAllYa.
And the only good walls and deterrents are around Obama's house and neighborhood. Don't want the riff-raff wandering in.
Is There A 10-Foot Wall Outside Obama’s House? We Went There To Find Out
So does Obama have a 10 foot wall around his house? We tried to fined out. But we were stopped by all of Obama's other walls from even finding out todaydailycaller.com
You must be registered for see images attach
But, you know, protecting the entire country like that would be immoral.
presidents dont control the gas prices. well, there is limited things they can do that directly affect, like the reserves thing. But I would like to see biden nut up for once and either have made it clear to the oil companies or just outright doing so(nationalize them to make them produce gasoline, fuel oils, crude all that) because they were willingly holding off and letting us pay out the cazzooo because $$$$$. This is what happens when 4-6 companies have control of the entire countrys oil industryHey! Uncle Joe is doing the best he can. See how he’s lowering gas prices for us?