kenneth10ss
Newbie
Let me start by the beginning i bought this truck 1998 silverado single cab with a rebuilt engine and transmission the previous owner said the swap has 35000 miles. Drove it from where i bought it to my house 3 hour drive it got home good, 10 minutes into my journey home i get a check engine light don’t think much of it. run the codes when i get home and i got these (P0131,P1133,P0300,P0171) i then replace distributer/spark plugs/ spark wires/ignition coil. i noticed the core support was bent so i removed the WHOLE front clip replaced fenders,core support,radiator(the plastic on it was broke) new ac condensor. I got this out of way and when i got back to building the front clip i don’t know if i left out any wire or ground unconnected because now the truck does not want to turn on at all no lights nothing at all. I’ve replaced Starter/Battery/ignition relay and nothing let me also remind you i don’t have much mechanical exprience so it is highly possible i left something unplugged. So please guide me with pictures if you have any questions let me know i will also upload pictures of the setup how it is now i do see that my lighting cable ground isn’t connected and the hood isn’t connected i also see 2 connections with the lighting wires not connected if someone could tell me what that is. Thanks to everyone.