My 454 SS build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fastfreddys454ss

I'm Awesome
Joined
Jun 14, 2020
Messages
151
Reaction score
227
Location
Gresham Oregon
Here is my truck I started on 5 years. You don’t have to have a ss to do this with. Theses upgrades apply to all our trucks.you can use a regular truck. Although this is a original ss it’s merely badging and a few other options that make this different from other trucks.Seems like the interest in fixing up OBS and NBS is dying down a bit. Hopefully this give others ideas. For all you puriest,I saved every ss part I pulled. Before and after build

You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

fastfreddys454ss

I'm Awesome
Joined
Jun 14, 2020
Messages
151
Reaction score
227
Location
Gresham Oregon
Original 454 SS with 60,000 miles


Suspension & Brakes

  • SSBC rear disc brake conversion
  • Pro Performance revelator 14” front brake conversion with 5 on 4.5 bolt pattern
  • RideTech upper and lower strong arms
  • Ridetech Front Coolride
  • Ridetech Rear Air Bar 4 Link
  • Accuair endo cvt ilevel 5 gallon air management system
  • Gm Factory Hydroboost upgrade
  • Yellow Stuff EBC Brakes on all 4
  • Line lock
Tires & Wheels

  • Front 19x8 Rohana RC10 wheel with Nitto NT555 245/40R19
  • Rear 20x10 Rohana RC10 Wheels with Nitto NT555R Drag Radial 305/35R20
  • Rear 5 on 5 to 5 on 4.5 wheel spacer adapter
Engine

  • Procharger
  • Freshened up 454 with unknown performance cam (done before I owned it)
  • ported and polished peanut port heads (done before I owned it)
  • Jet stage 2 chip upgrade (done before I owned it)
  • TBI rebuilt by SPR performance 54mm bore, double sealed needle bearing, internal regulator removed
  • Aeromotive adjustable fuel regulator
  • Edelbrock T.E.C headers
  • Edelbrock 3764 intake manifold
  • 3” dual exhaust with Flowmaster HP2 muffler dumped at axle
  • Flow master Dual high flow cats
  • Electric dual exhaust kick outs
  • Heated o2 sensor
  • Quantum 340 LPH high flow fuel pump
  • Champion Aluminum radiator and shroud/ summit racing dual electric fans
  • Power quality cs130 500 amp alternator conversion
Body

  • KDesigns Front Air Splitter and Rear Wing
  • Rear Diffuser Custom Built
  • GMC stock Grille with mesh insert
  • Spyder Headlight and Taillight Led Conversion
  • Led marker lights
  • Ram air hood with functional air intake
Interior

  • Dakota Digital VHX red carbon fiber Gauges w/gps Speedo
  • Metro Double Dinn Stereo Adapter with JVC Head Unit
  • Kicker KX 800.5 amp
  • Kicker QS carbon fiber 6” kick panel Speakers with tweeter
  • Q-logic kick panels
  • Kicker Comp/RT 12” preloaded speaker box
  • S&W Racing Customized RollCage with wrap around dash bend
  • 1990 Camaro Center Console Customized with Lokar shifter and real carbon fiber Shifter Plate
  • 1990 Drivers power seat track conversion
  • LMC billet steering wheel with line lock button bracket
  • Wolo Train horn with Sherman tank compressor
  • Chevrolet valve covers
 
Last edited:

fastfreddys454ss

I'm Awesome
Joined
Jun 14, 2020
Messages
151
Reaction score
227
Location
Gresham Oregon
Rohana rc10 wheels and nitto 555 g2 front and drag radial 555r rears

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

fastfreddys454ss

I'm Awesome
Joined
Jun 14, 2020
Messages
151
Reaction score
227
Location
Gresham Oregon
Edelbrock headers and intake. Flowmaster Hp2 and high flow cats

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
Last edited:
Top