No write up lol
I had read that you can throw them in the oven and pop the lens off...do what you want to them.
Sooo I decided to try, it was harder than I thought. Took a lot of persuasion and patients. I thought several times I was going to break the light. After a few times in the oven, I think 220-250 degrees I finally got them off.
I ended up putting some square fog lights from Amazon that have the square led changeable colors around it. Once I did that and cleaned them up I bought head light sealer, sealed them up... that was harder than expected too. I ended up using apoxy and clamps to squeeze it tight while the apoxy dried.
It worked!
The leds going around it are off amazon too. 24in light strip. My first set got water in it...fml so I ended up taking another chance and buying another set that says it's IP67 waterproof...whatever that is. Went with it. So far so good. It's still chinese...
Both are hooked up to different switchs. The fog light one has a remote that came with it also an Bluetooth app to get (more than 16million colors 200 chasing modes yada yada yada) remote with 10 colors works fine for me lol.
Oh yeah the fogs are 4" and go where the high beams are. I think it's neat because I can match the square led with the marker lights and it sets it off.
There's so many options of lights I can do now.
Here's some pics, they are so bright it's hard to get a good pic.
Lots of time and patients.
There's a guy on YouTube that did the same thing with his gmt400. I don't have the link but look up on YouTube 88-98 chevy headlight mods
Take your time if you do it!
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach