Blasphemy
Newbie
- Joined
- Sep 8, 2013
- Messages
- 39
- Reaction score
- 4
So I've been searching for about two hours now and haven't been able to find a pinout diagram (even on lt1swap.com) of the connector that goes through the firewall on the driver side. I changed the whole harness in the truck and the pins in the donor harness connector are not the same as the one in the firewall. I had the old harness as a visual reference but my stupid friend borrowed my truck for a month and threw it away and needless to say I was f-ing pissed. Anyways I'm not getting any power to my brake lights (was with original harness) and my oil pressure gauge is pegged all the way to the right in the 3 o'clock position. I'm swapping to an LQ9 in a month or so, so having a pinout diagram would be mucho helpful, but in the mean time I want my lights and gauge to work. Also worth mentioning, the donor harness I got didn't have connectors for the brake lamp relay in the fuse block. Can I get my brake lights to work without the relay circuit?
You must be registered for see images attach
You must be registered for see images attach