Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Anyone done it? looking to put some taller shock hoops, right now i have f250 shock mounts. The way i want to mount it the inner fender is right inline with the top of the hoop. Has anyone trimmed the inner fender? does it look ok?
Place the gusset on the axle and tap lightly with a hammer to seat it on to the axle. Make note of where the gusset contacts the axle and remove all paint and grease from the axle housing. Weld gusset in place using 1" stitch welds.