The Stupid Engine Questions Thread

[that 89 named pearl]

MSD box maybe? Might be cheaper than buying all the stuff needed to program an EPROM.

2x4 block under the gas pedal

i like the 2x4 idea but i would like to be able to apply all of my already limited beans lol, what msd box would you run?

 

[Orpedcrow]

what msd box would you run?

I’m not sure, I figured they might be readily available used

 

[OldSchoolMentality]

Power steering pump high pressure line, which spot does it connect to on the gearbox? When you’re looking at it, is it the Right side thread hole for the high pressure?

 

[OldSchoolMentality]

If you happen to swap the hoses on the gearbox, coming from the power steering, would that make it/be hard to turn when idling. Because it gets stiff.

 

[Orpedcrow]

It’s been awhile since I’ve done them but I thought they were different sized lines?

 

[Orpedcrow]

You must be registered for see images attach

@OldSchoolMentality
Looks like the line closest to the frame is the return. Hope this helps.

 

[Orpedcrow]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[OldSchoolMentality]

You must be registered for see images attach

@OldSchoolMentality
Looks like the line closest to the frame is the return. Hope this helps.

Thanks.

 

[baddawg]

So much for my 361959, 4 bolt 454 HI PERF block.
Engine shop found a Crack in it. So, free boat anchor if anyone has a need.
I could use some help deciphering the one I'm going to build now.
Casting # 14015445 = 75 to 90 454
Scoped thru pan hole, is a 4 bolt main
What I ask help with is;
Stamped obove timing cover = T06061SB
And, stamped on pass block pad = CJE197066

Got about $2500.oo setting here in parts for the GEN 4 block
At least that's not a waste.

Thanks guys

 

[PlayingWithTBI]

Engine shop found a Crack in it. So, free boat anchor if anyone has a need.

Look at the bright side; At least you found it before building and trying to run it.