Synthetic blend oil!!

[woody31]

i have 2 cases of synthetic blend 10-30,,for my honda accord,, I just changed the oil in my truck last weekend,,,this thing sat in a barn for the last 11 yrs,,it still had a PF-35 oil filter on it,,,i run delo 15-40 in all my small block chevy engines,,never a problem.

 

[GMC1994K1500SierraSL]

Hmmm I'll have to just keep experimenting then, I have a log book that I record my km at a change, what oil I used and the filter


Sent from my iPhone using Tapatalk

 

[Virginiabound]

Diesel oil intrigues me, what weight and brand do you use?

 

[Jorge6.5]

Diesel oil intrigues me, what weight and brand do you use?

That's what I'm thinking. Really got nothing to lose, my motor already has a top end knock.

 

[tanman_2006]

I use case IH 15/40 in older gassers that might use a bit of oil. We get alot of life out of them that way.

I run mobil 1 synthetic in EVERYTHING else (expcept my 95 amsoil truck). First oil change on my current 03 6.0L had me worried w/ 2qt in 5K miles of M1, 2nd change only used 1qt in 10K, now the 3rd change is at 7500 and 1/4 qt low. That is the biggest change I have seen on a synthetic swap.

 

[GMC1994K1500SierraSL]

Interesting, I'll have to try another oil change and see if I lose as much as the first time, I'll remember that diesel oil trick too incase synthetic doesn't work for me


Sent from the Sierra Club

 

[thz71]

Subbed for impending "oil thread" fallout

 

[polar]

You should use that nex gen recycled stuff. It's smells great when you open the bottlr


Sent from my iPhone using Tapatalk

 

[tanman_2006]

Its not bad oil, we ran the valvoline recycled oil in my cousins 2013 6.0 before the dealer could get it in for excessive oil usage, sucked over 1qt/500 miles. Wanted cheap oil but good quality for the bearings.

source unknown

 

[95chev]

I use case IH 15/40 in older gassers that might use a bit of oil. We get alot of life out of them that way.

I run mobil 1 synthetic in EVERYTHING else (expcept my 95 amsoil truck). First oil change on my current 03 6.0L had me worried w/ 2qt in 5K miles of M1, 2nd change only used 1qt in 10K, now the 3rd change is at 7500 and 1/4 qt low. That is the biggest change I have seen on a synthetic swap.

I ran john deere torque guard in my old dakota once because we didn't have anything else