Somewhat official REbuild thread

[saggin92]

well didn't get much done tonight some bolts I bought were to long, going tomorrow to get the right ones, but while putting the frnot drop brackets on I noticed my motor and my tranny (which has less than 10,000 miles on it) are both leaking profusely. so an LS swap is in the future sometime. any ways here's some pics..

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

and that's about it.

 

[saggin92]

ran iinto a snag, does anyone know where i can get just the spindles for my truck the lift is a trailmaster and it takes a spindle spacer but im missing an important piece to them. trailmaster doesn't offer the same type of lift anymore im gonna email them and see what i can do anyone have any suggestions? they need to be about 4 inches or so.

 

[saggin92]

this thing is giving me so many problems all of the stock brackets are squeezed together from the old lift, so every time i try to put brackets on they will not fit.

 

[saggin92]

should be on the temporary wheels tonigh or tomorrow, anyone have any clue where i can get torque specs on the suspension parts?

 

[ChrisAU]

I believe the torque specs are included in the instructions for a Rough Country lift that you can get on their website.

 

[saggin92]

I believe the torque specs are included in the instructions for a Rough Country lift that you can get on their website.

thanks mang.
idk how to do repsbut when i do ill give you some

 

[sewlow]

thanks mang.
idk how to do repsbut when i do ill give you some

Hit the little 6-point star (Star of David?) in the bottom left of the posting.

 

[saggin92]

it only shows that on post and it says I have 5 points?

 

[saggin92]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

its all done, needs an alignment. also those are temp. 265's.

 

[saggin92]

Sold the truck back in feb. looking for another one but preferably ecsb and at least a 96