seat fitment

[dcZ71]

rightisray and I were contemplating a seat swap, my buckets for his 60/40. But my thoughts were I could run into some issues because his is a 2wd. Shouldn't the inside track on the 60% side mount lower because of the trans tunnel height difference. So I would need to find a set of 60% 4x4 tracks to make it happen?

 

[1997chevydriver]

rightisray and I were contemplating a seat swap, my buckets for his 60/40. But my thoughts were I could run into some issues because his is a 2wd. Shouldn't the inside track on the 60% side mount lower because of the trans tunnel height difference. So I would need to find a set of 60% 4x4 tracks to make it happen?

Pretty sure there is no difference in trans tunnel. Should work just fine.

Sent from somewhere in MN

 

[bluex]

Pretty sure there is no difference in trans tunnel. Should work just fine.

Sent from somewhere in MN

x2 I put a 60/40 in mine till it broke, the passenger side 40 bolted in an the Dr side 60 I only had to drill the front inside mounting hole. Other than that it worked fine. The seat I had was from a 2wd I think. I'd love to find another one too...

 

[dcZ71]

ok thanks. After some research, I now believe I understand the difference. 2 or 4 doesnt matter. regular cabs and tahoes had the smaller trans tunnels. Ext cab/crew/suburban are larger. correct me if im wrong,