Rough Country 4" Spindles and Driveline Question

[sbdblyss]

Hello. I have a 95 2wd extended cab and installed the rough country 4 inch spindles. The springs in the truck were already longer than stock from the previous owner so the total lift is now about 6 inches. I put in 4 inch blocks in the rear and it is leveled out. The yoke attached to the driveline is extended now and I want to get some opinions as to whether or not i should purchase an extended driveline or yolk. I have attached the image. Thanks!

 

[Steve's Chevy]

I will have to go look at mine to see how it is, do you have pics of the way the truck sits now?

We all like pics here.....


and welcome to the site!

 

[sbdblyss]

I have attached a few more pictures. The bed is being prepped for paint but it sits level when it is on. Thanks for the help!

 

[Steve's Chevy]

Very nice , are those 33/12.50?

When I had the Fabtech 7.5" lift and used 5" blocks out back I had to use a 1" drop for the carrier bearing . I will see when I get home if I have a pic

 

[sbdblyss]

I didn't even think it was possible to drop the carrier bearing. Great idea! These are 35x12.5s on 17x9s. Let me know if you come up with a picture. Thanks!

 

[Steve's Chevy]

Well I cant find any pics up close of the part I had to use, all I have is this one. it just takes the crossmember and puts it under the frame to allow the bearing to drop. Im sure you can see the shiny thing under my truck..........that's the drop.

You must be registered for see images attach

You must be registered for see images attach