Oil fouled, or carbon or what?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
so, my engine hasnt been acting right for a little while now, trying to figure out whats going on and my spark plugs definitely look like theyre fouling just cant tell if its oil fouled or what its not ashy but its definitely a dry crust with a bit of a shine to it, dont know if anybody here can identify anything but figured id ask
You must be registered for see images attach
You must be registered for see images attach
 

90 Silverado

I'm Awesome
Joined
Jun 11, 2011
Messages
210
Reaction score
324
Location
Salinas, Puerto Rico
Exhaust valve seals are usually the cause on the 305 and 350 V8's , I find that using Autolite platinum plugs in these engines don't foul as much as others.

Mine ( seals )have never been changed, I just get the smoke on startup. Not enough to worry about.

Doug in P.R. :cool:
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
What vehicle? What engine? How old are the plugs?
the vehicle itself although not very relevant is a 1994 chevy 1500, the engine is a 1992 tbi 454 from a suburban, the plugs i cant remember how old they are i havent driven the truck regularly in years, they are at least a few years old, but might have less than 50 miles on them.

i can break down the series of events but if someone can visually read spark plugs without reading this part and making assumptions that would be helpful thats more what i was looking for was an unbiased read to see which path to follow

i went out one night about 5 years ago when it was around -10F probably a little colder, truck wasnt having it. got a few blocks died, got it started giving it some gas, hauled ass home without letting off, wasnt sure about it and didnt need to go anywhere i worked from home so i left it for a while

come back a few months later, start driving it again, seems okay enough, but i start seeing dark crap at the bottom of my coolant reservoir, appears to be oil, but no trace of coolant in the oil i can find and the cylinder pressure appears to be ok last i checked so i dont think its a head gasket, could be the cooler in the radiator cracked, could be the intake gasket, either way it was just a tiny bit wasnt even really losing oil, pressure seemed normal, wasnt getting hot at all, and i didnt have the money or time to deal with it, and i really didnt ever take it anywhere, so i drove on it for the time being

a while after that, it started to die randomly, it would die out after having run for a while, then refuse to start, it would eventually start back up and run fine but it was definitely having issues, so i parked it again, sat for a couple years basically

come back, do some things to it, still runs like garbage, replace the temp sensor and the distributor which yes i set properly, it didnt seem to like 4btdc so i went 0btdc, now when i try to start it, gas shoots up out of the throttle body, and my plugs apparently look like this after the entire ordeal though i dont know at which point during all that i changed them if at all, im pretty sure ive changed them somewhere in there, but i cant say for certain, and i dont feel particularly comfortable even trying to start it with vaporized gas flying out of the top, but not having a working vehicle is horrible, and im out of work now so i cant just load the parts cannon i cant afford to replace anything unless im absolutely sure it needs replacing
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
Exhaust valve seals are usually the cause on the 305 and 350 V8's , I find that using Autolite platinum plugs in these engines don't foul as much as others.

Mine ( seals )have never been changed, I just get the smoke on startup. Not enough to worry about.

Doug in P.R. :cool:
could be, might not be related to my main issue but im just trying to figure out if it is. because my problem is something to worry about lol
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
oh yea and one other thing its started doing is stuttering and acting like it wants to die even cold now, and the RPMs have trouble dropping below 800, it starts to drop, act like it wants to start to stall, and ramps back up
 

Schurkey

For a pacifist, I sure am a radical mother...
Supporting Member
Joined
Jan 14, 2018
Messages
17,611
Reaction score
27,201
Location
The Seasonally Frozen Wastelands
Is your question that crappy plugs can make the engine run bad for years; or
an engine running bad for years can make the plugs look crappy?

Either way...the answer is "yes".

Get new plugs. Verify the cap, rotor, plug wires. Test for ignition coil spark output using a spark tester calibrated for HEI ignition. Probably install a fresh O2 sensor.

Drain the old gas out of the tank--pull the fuel filter, run the fuel pump until the tank is empty. Refill with fresh gas and a new filter. Test fuel pressure. Change oil. Make sure no oil is coming up through a failed PCV system.

Then connect a scan tool, look at all the sensor data; and all the output data. See what--if anything--looks goofy.
 

Hipster

I'm Awesome
Joined
Mar 7, 2017
Messages
4,262
Reaction score
8,175
Location
Liberty, NC
i can break down the series of events but if someone can visually read spark plugs without reading this part and making assumptions that would be helpful thats more what i was looking for was an unbiased read to see which path to follow
What's to read? They look to have cooked on oil, and the porcelain is dark. The tan color is darker then what you would see just from fuel additives. They look neglected. The second one appears to have some fuzzy loose crap on it. Hopefully that came from the exterior rather than from inside the chamber. I see 2 plugs. One of other 6 might reveal something different.

You mentioned gaskets and an oil cooler in the radiator as reasons to mix water and oil but those are not the only reasons. -10f and the coolant turning to slush can break a block or head. I say this because -10f seems to be where your problems started. Was the antifreeze ever tested?

Schurkey provided a very complete list but I would add a proper compression test and a cooling system pressure test which I think both tools can be borrowed from the parts store for no cost before any real money is spent.
 
Last edited:

gearheadE30

I'm Awesome
Joined
Oct 6, 2016
Messages
234
Reaction score
221
Location
Columbus, IN
Those spark plugs just look old and nasty to me, and like the engine is getting a bit too much fuel and probably burning some oil or really bad gas (carbon deposits). But could also be if it's just idling, only running in warmup, something like that, and never actually getting driven and getting hot enough to clean all that crap up.

Get new spark plugs and rule them out. They're cheap.
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
Is your question that crappy plugs can make the engine run bad for years; or
an engine running bad for years can make the plugs look crappy?

Either way...the answer is "yes".

Get new plugs. Verify the cap, rotor, plug wires. Test for ignition coil spark output using a spark tester calibrated for HEI ignition. Probably install a fresh O2 sensor.

Drain the old gas out of the tank--pull the fuel filter, run the fuel pump until the tank is empty. Refill with fresh gas and a new filter. Test fuel pressure. Change oil. Make sure no oil is coming up through a failed PCV system.

Then connect a scan tool, look at all the sensor data; and all the output data. See what--if anything--looks goofy.
neither, my question is whats the most likely cause for the plugs looking like that. oil in the cylinders, too much fuel, or is it just normal carbon buildup. the initial issue wasnt plugs, im trying to track down something else, and knowing if theres oil getting in the cylinders or that its getting too much fuel or whatever would help diagnosing the overall issue. the plugs were not like this when it started guaranteed theyve been changed since it started acting up
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
Is your question that crappy plugs can make the engine run bad for years; or
an engine running bad for years can make the plugs look crappy?

Either way...the answer is "yes".

Get new plugs. Verify the cap, rotor, plug wires. Test for ignition coil spark output using a spark tester calibrated for HEI ignition. Probably install a fresh O2 sensor.

Drain the old gas out of the tank--pull the fuel filter, run the fuel pump until the tank is empty. Refill with fresh gas and a new filter. Test fuel pressure. Change oil. Make sure no oil is coming up through a failed PCV system.

Then connect a scan tool, look at all the sensor data; and all the output data. See what--if anything--looks goofy.
also, fuel tank(and obviously all gasoline), filter, all lines, and pump, plus entire distributor including cap and rotor and module, and the coil were all replaced about 6 months ago. fuel sender and the regulator were replaced about a year ago. pressure runs 15psi consistently currently was about 10 most of the time before.

scanned regularly, havent seen anything that sticks out, but it only hesitates for a fraction of a second but i can tell its doing it, and yea the rpms look funky, the map changes, etc, but its hard to tell if the map is dropping because the engine is stalling or the engine is stalling because the map is throwing it off, its difficult to say on a lot of things if its the chicken or the egg. and i never have the ability to scan it or check fuel pressure or whatever when its dead and wont start. that situation happens so randomly when im out and about with it i cant nail it down. sometimes itll run around town for hours without an issue, sometimes itll die randomly after 4 hours, sometimes itll die after being driven for 30 minutes, but i havent been able to recreate it in the driveway and believe me ive tried
 

Junkie2100

Newbie
Joined
Jun 10, 2021
Messages
14
Reaction score
8
Location
Illinois
also as mentioned i did a proper compression test, i have a tester it was fine last i checked it and it was acting up long before i did. as far as a coolant test, knowing its got a leak somewhere not sure what pressure testing the coolant system would tell me that i dont already know
 

Latest posts

Forum statistics

Threads
78,033
Messages
1,643,921
Members
81,075
Latest member
gmt400isking
Top