supermailman
OBS Enthusiast
1990 C1500 with the 350. Truck ran before the job. Made sure to mark, take pictures, label etc EVERY thing as I did this and consult several other sources. Put everything back together and now I'm getting no fuel from my injectors. Took out distributor (which was brand new) and manually turned engine by hand until cylinder 1 intake opened and then closed. Turned another inch or so after that and realized I had no timing mark on crank pulley so I left it there and reinstalled distributor, meshed with cam gear, then turned engine until the oil pump shaft lined up and it dropped the rest of the way. Bolted everything down. Still no fuel from injectors. I am definitely hearing the fuel pump so I'm not sure what is going on. Everything is plugged in and accounted for including grounds. Any ideas?
