need some quick help.

[Chevyguy78]

I'm in the middle off replacing my pitman arm and it will not come off. Im using a pitman arm puller. I have it super tight and I have walked on it with a sledge hammer and it will not pop lose. Any ideas?

 

[bluex]

Cut a slit it in with a side grinder an a cut off wheel. Just don't get the box or shaft while your cutting.

 

[House003]

Drill a 2x4 onto it with the bolts on the steering box and have someone stand on while you use a breaker bar on it

 

[twomanymontes]

Cut a slit it in with a side grinder an a cut off wheel. Just don't get the box or shaft while your cutting.

This! That's what I do all the time when I replace them.