Swims350
I'm Awesome
ouch LOL!!!!!!!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ouch LOL!!!!!!!
good choice. only downside is the first gear ratio, but it's not bad.
I thought you had a 4l60e or same as the 700r4? if so that's not a bolt in, you want a 9 inch tail th350.
\**** me, yea i need a 9" oppsnope 6 inch is short tail th350, a 700r4 or 4l60 is the same as the 9 inch tail th350s. check around on the net for the measures the 9 inch tail is like 3/8 inch difference between it and a 700. That's IF you don't want to mod the driveshaft.
http://www.rowand.net/shop/tech/automaticoverdrivetransmissionswap.htm
http://www.tciauto.com/Products/TechInfo/trans_dims.asp
looks like one is 30-3/4 and the other is 30-11/16 or so.
I would measure yours to be sure from bellhousing to the end of the tailshaft. I got a 9 inch tail and a 6 inch tail th350 I can measure and compare if need be when it's not raining.