Leaf spring R&R....

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wilecoyote

I'm Awesome
Joined
Oct 15, 2019
Messages
703
Reaction score
2,345
Location
Rural Apex N.C.
My 98 K1500 bushings are rusted and about shot, the truck rides like **** on rough roads and pot holes. It seems replacing them is a *****. My 6.5' bed had a high, heavy fiberglass A R E shell w a fiberglass back door that replaced the tailgate all it's life until I bought it. The truck sits level w no load.Fill the bed w fire wood and it sags a lot. I'm thinking the springs are about wore out and replacing them and the bushings would be better/easier than replacing the bushings.......what do ya'll think?
 

PlayingWithTBI

2022 Truck of the Year
Supporting Member
Joined
Jan 3, 2019
Messages
14,623
Reaction score
29,691
Location
Tonopah, AZ

SUBURBAN5

I'm Awesome
Joined
Jul 18, 2020
Messages
4,781
Reaction score
8,231
Location
Houston
I went with general spring and got a set of 3/4 ton leafs. Also went on oreilly.com and got the shackles from them. (Moog) slapped them in and got the ass up like how I wanted it. However mine has a 4" lift so that's why I wanted a higher end rather than getting oem 1/2 which were 4 plus 1 I think. Easy to swap rather than messing with the bushings bull crap and getting chewed up by mosquitoes lol
 

boy&hisdogs

I'm Awesome
Joined
Mar 2, 2012
Messages
687
Reaction score
1,008
Location
Eastern WA
I went with general spring and got a set of 3/4 ton leafs. Also went on oreilly.com and got the shackles from them. (Moog) slapped them in and got the ass up like how I wanted it. However mine has a 4" lift so that's why I wanted a higher end rather than getting oem 1/2 which were 4 plus 1 I think. Easy to swap rather than messing with the bushings bull crap and getting chewed up by mosquitoes lol

I did the same thing when I lifted my truck. I went and got 4/1 leaves becuase I have a lumber rack, tool boxes and a full size 37" spare.

New bushings already in the new springs and new shackles with bushings already in them meant all I had to do was slap the bolts in, no torch, no punches, no mess.
 

SUBURBAN5

I'm Awesome
Joined
Jul 18, 2020
Messages
4,781
Reaction score
8,231
Location
Houston
I did the same thing when I lifted my truck. I went and got 4/1 leaves becuase I have a lumber rack, tool boxes and a full size 37" spare.

New bushings already in the new springs and new shackles with bushings already in them meant all I had to do was slap the bolts in, no torch, no punches, no mess.
Yup. It's either change them now or change them later but either way you'll be repeating the process rather then slap em in and be done
 

Wilecoyote

I'm Awesome
Joined
Oct 15, 2019
Messages
703
Reaction score
2,345
Location
Rural Apex N.C.
Before you spend money, LOOK at the existing leafs.

If they're cracked/broken, you know you're not going to put on fresh bushings, or a helper-leaf.
pretty sure they're not cracked but they are rusty and the shackles are rusty, the bushings are about rotted out, the hangers and rivets are ok.
 

Caman96

SELF
Supporting Member
Joined
Jul 17, 2020
Messages
16,093
Reaction score
38,087
Location
The Hub
I recently installed this kit from ATS. It’s 4+1 3/4 ton leafs. Massive improvement!!!
Also, went with cast U-bolt plates.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Attachments

  • 02CA9001-BC6D-4705-A7AC-BC9176C9EDD3.jpeg
    02CA9001-BC6D-4705-A7AC-BC9176C9EDD3.jpeg
    183.3 KB · Views: 2
  • 69304219-7E6C-4BAC-B7EE-DA990532DF09.jpeg
    69304219-7E6C-4BAC-B7EE-DA990532DF09.jpeg
    50.9 KB · Views: 2

jaywestfall

I'm Awesome
Supporting Member
Joined
Sep 22, 2014
Messages
279
Reaction score
341
Location
Houston

ChrsLytn

I'm Awesome
Joined
Jan 10, 2013
Messages
113
Reaction score
116
Location
Douglasville,Ga.
My 98 k1500 (330k)
You must be registered for see images attach
came with 3/1 or 4/1 and I had put a helper spring on each side years ago. I bought a set of 5/1
You must be registered for see images attach
for it less than a year ago and wasn't sure how the rear was gonna set. But it's the same. 38" to the center of the wheel openings.
On 285/75/16 Michilens
 

jaywestfall

I'm Awesome
Supporting Member
Joined
Sep 22, 2014
Messages
279
Reaction score
341
Location
Houston
My 98 k1500 (330k)
You must be registered for see images attach
came with 3/1 or 4/1 and I had put a helper spring on each side years ago. I bought a set of 5/1
You must be registered for see images attach
for it less than a year ago and wasn't sure how the rear was gonna set. But it's the same. 38" to the center of the wheel openings.
On 285/75/16 Michilens
Thank you! That's what I have for my 98 C1500. Same shocks, too!
 

Latest posts

Forum statistics

Threads
78,111
Messages
1,645,206
Members
81,289
Latest member
Kikkomania
Top