Interior light issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Darkimag22

OBS Enthusiast
Joined
Jun 12, 2021
Messages
77
Reaction score
119
Location
Canada
My interior lights will not turn on/off with either of the doors being opened/closed (I can turn it on manually on the dash). Just this morning I found that if I hold the unlock switch down the interior lights turn on and then turn off when I release it. Any ideas what's going on??? Another thing to note, I can lock/unlock from my drivers side but when I use the passenger side all I get is a clicking sound coming from underneath the dash under the steering wheel....a bad relay maybe???

Thanks guys.
 

scottydl

I'm Awesome
Joined
Dec 2, 2018
Messages
155
Reaction score
167
Location
Illinois
Sounds like a wire shorting out somewhere. Might need to start by checking the wire bundle running between the body and the door… on some GMs that was subject to twisting and wires breaking over time. There’s probably a black rubber accordion-like cover to peel back in the door crack so you can take a look at the wires.
 

Darkimag22

OBS Enthusiast
Joined
Jun 12, 2021
Messages
77
Reaction score
119
Location
Canada
So I replaced the relay under the steering column but still have the same issue...interior lights do not turn on when a door is opened. While under the dash, it looks like the truck had a command start installed at one time as there is a bunch of wires that have been cut/soldered or tapped into. Guess I will do my best to trace all the extra wiring, remove it and see if that helps at all.
 

98K3500Dually

Newbie
Joined
Apr 17, 2022
Messages
5
Reaction score
0
Location
Livonia, MI
Hey, I know this is an old thread, but did you resolve this issue? I am having almost the same issue with a customers 98 K3500. Interior light comes on only when the lock/unlock button is held. Someone previously has overlayed the tan circuit from the passenger side to drivers side door. When I remove the overlay, the drivers door lock does not function.
 

Tdean91491

Something about an OBS
Joined
Oct 16, 2016
Messages
193
Reaction score
42
Location
Alabama
Not sure if this will help you at all but hopefully it will.
 

Attachments

  • ALLDATA Courtesy Dome Lamps Testing.pdf
    435.2 KB · Views: 17
  • ALLDATA Courtesy Dome Lamps Testing 1.pdf
    121.2 KB · Views: 8

dave s

I'm Awesome
Joined
Oct 25, 2019
Messages
258
Reaction score
484
Location
pa
My interior lights didn't work when I opened either door but did work if you used the switch. Replacing both door switches fixed it . I did not have any of your other issues though.
 

98K3500Dually

Newbie
Joined
Apr 17, 2022
Messages
5
Reaction score
0
Location
Livonia, MI
I found a burnt trace in the RKE/RFA module and it is for the drivers door unlock command. I am going to the junkyard in hopes to find one on Friday and see if it resolves the issue. This pin is shorted to ground after repairing the trace, which leads me to believe there is a blown diode within the module.
 

Attachments

  • EEC3F67F-4BE0-48C8-AA58-6F3CBF547511.jpeg
    EEC3F67F-4BE0-48C8-AA58-6F3CBF547511.jpeg
    293 KB · Views: 7

AK49BWL

GMT400 Forever!
Joined
Mar 21, 2015
Messages
2,239
Reaction score
3,625
Location
Longview, TX
It's supposed to be shorted to ground, that's the return path for the lock command. In fact, both lines are shorted to ground when neither are activated.
 

98K3500Dually

Newbie
Joined
Apr 17, 2022
Messages
5
Reaction score
0
Location
Livonia, MI
It's supposed to be shorted to ground, that's the return path for the lock command. In fact, both lines are shorted to ground when neither are activated.
The way the GM schematic appears, is that circuit should be “open” unless it is providing power to the unlock circuit at the drivers door. When the module is plugged in and I press the unlock button, it drew 22amps on my meter before the fuse blew. When the module is unplugged, it only draws 3amps.

Maybe I don’t understand the schematic fully, and I plan to test the new module when I get one to see if it is different. This is not a system I’ve dealt with before and is far different from the 90s Ford RKE systems I’m familiar with.
 

Attachments

  • 0FA9F88B-4E8F-42ED-A8DD-5B776A220796.png
    0FA9F88B-4E8F-42ED-A8DD-5B776A220796.png
    552.4 KB · Views: 11

98K3500Dually

Newbie
Joined
Apr 17, 2022
Messages
5
Reaction score
0
Location
Livonia, MI
Looking closer at the actuator page, I see it now. I’m making the connection between both of the “J” triangles and seeing that circuit 694 (Tan) would have to be grounded for the doors to lock, and would have to provide 12v for the doors to unlock. I also understand how the previous owner jumping circuit 294 (Tan) from the passenger door at C213 would bypass the RKE module and allow both door locks to function
 

Attachments

  • 80459494-6E96-4754-8418-C57977EAE72B.jpeg
    80459494-6E96-4754-8418-C57977EAE72B.jpeg
    147.6 KB · Views: 8

AK49BWL

GMT400 Forever!
Joined
Mar 21, 2015
Messages
2,239
Reaction score
3,625
Location
Longview, TX
22 amps is extreme tho, that load is supposed to be shared by the door locks relay module, not the RKE module. That jumper is putting the load on the RKE module, hence the burnt trace.
 

98K3500Dually

Newbie
Joined
Apr 17, 2022
Messages
5
Reaction score
0
Location
Livonia, MI
junkyard module installed. Drivers door will now LOCK, but will not UNLOCK. Interior lights only come on when lock/unlock button is held. This tells me that this new module also has the same bad transistor or diode causing this issue. I think I’m seeing a commonality between all the unsolved cases of this issue that I’ve read about online. I have checked all circuits going to the module and I’m receiving all the proper inputs but no output. I think my next step is to bypass the module
 

Latest posts

Forum statistics

Threads
78,076
Messages
1,644,609
Members
81,185
Latest member
Alan9ari
Top