Roger Randolph
Newbie
I’ve found only a single reference to impala control arm used on an OBS. A little research shows they are 3/4” narrower than stock. Has anyone made this swap or can share some info?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I can only hypothesize on this...wants to lower it with spindles that push the wheel out. Using the Impala arms would tuck them back in? Again...only reason I could think of. Maybe we will learn something new.What's the purpose for swapping to Impala control arms?
Yep, good theory…I’ve only dropped the front by 3” and with 245/45R20, I have tire scrub….this has to be a common issue and has to be a good solution
Bad wheel choice, if you're not stuck to them, I'd choose something more suited to a lowered application. I don't have any info on running the arms you're asking about, but if they work, could help.. any link to the info you did find so we can check it out?Yep, good theory…I’ve only dropped the front by 3” and with 245/45R20, I have tire scrub….this has to be a common issue and has to be a good solution
Only mentioned here in another thread but zero reference…this week I’m gonna order a pair and compare…