How to: disable auto AC with defog

[Mangonesailor]

Great white, I resurrect this thread to ask if you still had the pictures of the PCB trace you cut AND, in particular, the jumper wire location you recommend.

I'd like to kill two birds with one stone next week when I do the trace cut, and I think it'd be good to keep this bit of info alive for others to use.

Thanks.

 

[Mangonesailor]

Bump, just to make sure the picture is findable:

You must be registered for see images attach

 

[CrustyJunker]

Thanks for following up on this. I know this thread is old, but there's lots of helpful info that we've discovered and tried over the years. Makes it easier for the next guy.

 

[dixiepc]

Bump, just to make sure the picture is findable:

You must be registered for see images attach

Is that the jumper for the recirculate door?

Do you have a picture of the trace that needs to be cut out to keep the compressor off?

 

[dixiepc]

I think I see it to the far right side of the picture.

 

[Mangonesailor]

Is that the jumper for the recirculate door?

Do you have a picture of the trace that needs to be cut out to keep the compressor off?

That's the jumper for the recirculation door AND the trace you have to cut