TonyMontana214
Newbie
my 1988s single cab harness was cut by the previous owner. i sourced a 1994 v6 harness from another single can and i planned onto installing it onto this one. Every connector works except these two. From under the dash passenger side this single red wire is just that a single red wire and connector. the donor harness has a different plug for this red wire. it has the red wire AND a green/purple twist combo. im sure i can splice the red to red wires but what do the green and purple wires go to? ive been looking at harness diagrams all day and have come upon zero helpful links.
Mainly what i want to know is what do the green and purple wires go to. this is all i need before i can proceed with my project.
To clarify, the single red wire is from the 1988's harness and the red/green/purple is from the 1994s harness
Mainly what i want to know is what do the green and purple wires go to. this is all i need before i can proceed with my project.
To clarify, the single red wire is from the 1988's harness and the red/green/purple is from the 1994s harness
You must be registered for see images attach
You must be registered for see images attach