Had a opps today

[Xxl2]

I was changinge my plug wires. I acidentaly broke the littl black plastic tube connected to the egr valve. Now i get code 32. Where can i get a tube?

 

[PlayingWithTBI]

I acidentaly broke the littl black plastic tube connected to the egr valve. Now i get code 32. Where can i get a tube?

Do you mean this tube? Can't you simply run a 1/4" (maybe) vacuum hose from the module to the EGR valve?

You must be registered for see images attach

 

[Xxl2]

It's the white line I tried a rig job don't think it likes it

 

[kennythewelder]

You can cut out the section that is broken, and use some rubber vacuum hose to repair that area. I have done that several times. It works good. Of course, the size of the vacuum hose has to be small enough to fit right around the plastic line. Most recently, I fixed my windshield washer hoses like that.

 

[Xxl2]

Dose Any one knk w the tube size to fix it

 

[Xxl2]

think i found my part

GM 10118727​

 

[Xxl2]

Also it only sets the code if it i drive alot on the high way for a long time

 

[Nad_Yvalhosert]

Also it only sets the code if it i drive alot on the high way for a long time

Interestingly enough, that's when the EGR system is most active!

 

[Xxl2]

wounder if it could be the solenoid i ll check it tommarow 400K on it

 

[Xxl2]

3/16 vac tube from Dorman helped alot runs better alot better