JAngeli
OBS Enthusiast
Have you installed the ball joint spacers? Was it for alignment issues?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Have you installed the ball joint spacers? Was it for alignment issues?
Minus the body lift that's exactly what I'm trying to do. I would like to get the body lift eventually but it as not exactly in the budget right now. I'm hoping it worksNo I haven’t installed them yet. But in theory they should work. I just purchased them and I’m currently in the process of rebuilding the entire front end of my truck. So I will be installing them here in a couple weeks.
Now a guy on a Facebook page said they solved his alignment issues and used 1.5” spacers (custom made) but he had the 4” spindles with 2” coil spacers and a body lift I believe so he was stretching his suspension big time.
Sent from my iPhone using Tapatalk
To keep this guide going... I wanted to post a link to some Ball Joint spacers I have found. Airbagit.com makes and sells them from there website and found them selling as well on eBay. Was very difficult to find some nowadays. I just bought some to finally and hopefully fix the chamber issue I have with the 4" spindle lift kit from RC. The ones I bought are from the eBay link and I will attach a photo of them. They come with grade 8 bolts as well.
So here's a link to a few different sizes and also 2500/3500 BJ spacers...
https://www.airbagit.com/SearchResults.asp?Search=X2-BJ-GM8898
Here's the eBay link to the ones I purcheses that are 1" thick...
https://www.ebay.com/itm/D-X2-BJ-GM8898-Balljoint-LEVEL-s-Chev-C15-25-5Lug/263669135660?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
You must be registered for see images attach