Firewall Thickness

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GoToGuy

I'm Awesome
Joined
Sep 16, 2020
Messages
3,169
Reaction score
3,736
Location
CAL
Where do I find the entry point in the driver's side?
It's a flat sheet, semi formed. Are able to use a tape measure? What you see attached to the engine side either goes through the firewall or has hardware showing on the interior side. And you tell by what formed area your looking at on the engine side as the interior is the reverse of the engine side.
 

AuroraGirl

I'm Awesome
Joined
Jul 27, 2020
Messages
1,060
Reaction score
1,241
Location
Northern Wisconsin
You must be registered for see images attach
You must be registered for see images attach



Old large cap HEI from a buick 350 with the TACH wire tapped. Fun fact, this wire isnt going to the dash. it goes about 2.5 feeet to the fender where it joins a plug of a bunch of other wires
You must be registered for see images attach
You must be registered for see images attach

First photo doesnt quite capture it so the second photo to the right does
 

AuroraGirl

I'm Awesome
Joined
Jul 27, 2020
Messages
1,060
Reaction score
1,241
Location
Northern Wisconsin
The connector is the assembly line diagnostic connector,predecessor to the ALDL. The old Sun diagnostic monitors plugged right into that connector.
YES. And if you dont have one of those, its also a convenient place to get various readings with a DVOM for various functions
 
Top