Super Silvi 1990
I'm Awesome
Oh and a four link wouldnt be bad eighter
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
And the nice thing about using just spindles, is that you don't have to get an alignment. Trucks look'n good.I used the BellTech 2inch drop spindels up front and their mount relocation kit in the rear which lowers it 4inches getting it level and not at a the hot rod rake also i used their entry level drop shocks so far it is great. The only problem ive had was the front tires hitting my fenders inner lip but i fixed that. Clearance is still good enough that i could drive over a curb if i needed to or in the snow. Its summer now so it hasnt rained hard enough to see if i need to get my sheilds back in. my front tires looked pushed out when i first sat it down but the measurements where the same when i got it lined up. What i did find out is that fenders on the bed are a couple inches wider than the front and it gives it that illusion. the front tapers in like so /\.
And the nice thing about using just spindles, is that you don't have to get an alignment. Trucks look'n good.