chevy_turbo454
Newbie
Hi:
Guys I have a concern. I bought an aftermarket intake manifold for my 350 Chevy engine. The intake came with some spacers for the 4 center bolts because this intake can be used neither for old engines (iron heads) or new engines (assuming like Vortec's). I build an old 350 engine (like 82-84 sbc) but when I start the engine and make some heat cycles it start to have oil and water leaks. So I take of the intake to change gaskets, but I found that these spacer for that 4 bolds didn't do the job to retain the intake... I really appreciate any HELP....
Guys I have a concern. I bought an aftermarket intake manifold for my 350 Chevy engine. The intake came with some spacers for the 4 center bolts because this intake can be used neither for old engines (iron heads) or new engines (assuming like Vortec's). I build an old 350 engine (like 82-84 sbc) but when I start the engine and make some heat cycles it start to have oil and water leaks. So I take of the intake to change gaskets, but I found that these spacer for that 4 bolds didn't do the job to retain the intake... I really appreciate any HELP....