Ditching Edelbrock 600 for 750 1407 maybe

[Moleman]

Picked this Edelbrock 1407 for free might ditch the 600 for it if it runs alright

 

[PlayingWithTBI]

Picked this Edelbrock 1407 for free might ditch the 600 for it if it runs alright

Cool! A dual quad tunnel ram

 

[Hipster]

With one barrel per cylinder should run like Enderle injection. double Goez INTA's. lol

 

[PlayingWithTBI]

Years ago, I had a 440 six pack (tri-power, 3 deuces, yada yada) couldn't ever figure out how the other 2 cylinders got their juice

 

[Hipster]

Years ago, I had a 440 six pack (tri-power, 3 deuces, yada yada) couldn't ever figure out how the other 2 cylinders got their juice

yeah, 2 short of an 8 pack. lol

 

[Moleman]

So far so good pulling down 21 or 22 inches of vacuum at 700 rpm

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[L31MaxExpress]

I would address that fuel line.

 

[Moleman]

So heres a bit of an update. I managed to pick up an inch of vacuum

You must be registered for see images attach

You must be registered for see images attach

 

[Supercharged111]

This motor pulls over 20" of vacuum AND flows enough air for a 750?

 

[Moleman]

Yes it is.that was with the A/C on. Here it is with the A/C off.

This motor pulls over 20" of vacuum AND flows enough air for a 750?

You must be registered for see images attach