Comp 240H

[nobears]

https://www.summitracing.com/parts/cca-k18-115-4

Other than the website says no is there any good reason this cam kit won’t work in an 88?

 

[b454rat]

I ran a Extreme Energy 268 in a TBI 406 with no ECM mods, I'd say you'll be fine

 

[PlayingWithTBI]

Yeah, because TBI runs on speed density (MAP) instead of MAF, cam manufacturers won't say it's "Computer Controllable" if it lowers your vacuum too much but, as @b454rat said, you should be able to do it.

 

[nobears]

I was more concerned about the year range listed. I know 88 is non balance shaft and I thought all the V6 were the same up until they started putting them in

 

[L31MaxExpress]

I was more concerned about the year range listed. I know 88 is non balance shaft and I thought all the V6 were the same up until they started putting them in

They are not. The balance shafts started in the CPI 4.3 in 92.

 

[nobears]

That’s what sorta had me worried as that cam kit is listed for 85-87. I presumed it was because EFI

 

[nobears]

Problem solved. I just went with a Lunati C262 K kit...