Buying my lowering stuff..One quick quesion

[polar]

So I am buying my lowering kit from summitracing.com to lower my 1998 chevy silverado extended cab 4/6. In my cart I have:

2-bel-10102i= Belltech front street performance shocks
2-bel-2212if=Belltech rear street performance shocks
1-bel-6605=Belltech rear flip kit with c notch
1-djm-cs2351-2=DJM 2" front lowering springs
1-djm-ds2056-2=DJM 2" front drop spindles
1-djm-cb15=DJM carier bearing spacer

I am wondering if I have everything I need to lower my truck 4/6? Also, is there anything else I should do to my truck while lowering?

Thanks, will post pictures of the progress.

 

[BHBurban]

Shock extenders for the rear.

 

[polar]

Do I need shock extenders

 

[BHBurban]

Yes. they help correct the shock angle once the axle is flipped.

 

[DRAGGIN95]

Yes. they help correct the shock angle once the axle is flipped.

Word!

 

[polar]

Alright I will add them to my list

 

[Blakestuhh]

You could probably buy a whole belltech kit with everything you need! That's what I did when I lowered mine!

 

[Devs93]

before you buy it I would hit up norcall for a price

http://www.gmt400.com/forum/showthread.php?15140-DJM-BELLTECH-Cheapest-prices-shipped!!

 

[polar]

I have already talked to Norcal on his pricing, and summit is cheaper than he is. Once I found that out I asked he would match the price and he never responded. The reason I am not buying a assembled kit is because I want the DJM spindles because they dont push the wheel out and I want to have the djm springs to go with the djm spindles for the best fit possible. The belltech flip kit and c notch is the beefiest(is this a word?) .

 

[Blakestuhh]

Push the wheel out?