GMC Burbalade
Busy slacking
Put a known good spider injector in, reseated plug wires, and replaced fuel pump relay. It now starts on it's own, but dies after 1-2 seconds, little bit of a hard start.
Waiting on a scanner to come in but in the mean time I had some 32" BFG MT Wrangler Rubicon take offs mounted, picked up a pair of factory 1 1/8" blocks from a 2008 1500 and a 2002 Escalade steering wheel in decent shape with radio controls.
Also got started on a bixenon projector retrofit. I'm using Acme Super H1 projectors with Morimoto XB 4500k bulbs and Acme Speedystart ballasts for now. Housings are original with new Depo lenses.
For reference, last pic is low beams: original driver side housing with new Sylvania 9006 bulb and retrofitted passenger side with HID. Can't even tell the halogen is on when sitting inside.
Waiting on a scanner to come in but in the mean time I had some 32" BFG MT Wrangler Rubicon take offs mounted, picked up a pair of factory 1 1/8" blocks from a 2008 1500 and a 2002 Escalade steering wheel in decent shape with radio controls.
Also got started on a bixenon projector retrofit. I'm using Acme Super H1 projectors with Morimoto XB 4500k bulbs and Acme Speedystart ballasts for now. Housings are original with new Depo lenses.
For reference, last pic is low beams: original driver side housing with new Sylvania 9006 bulb and retrofitted passenger side with HID. Can't even tell the halogen is on when sitting inside.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach