Bolts

[tommy loyal]

Size bolts 92 wheel hub assembly

 

[xXxPARAGONxXx]

Yes

 

[454cid]

Size bolts 92 wheel hub assembly

Complete sentences please.

 

[GoToGuy]

Lol, I'll see your hub and raise two dually drums.

 

[Schurkey]

Size bolts 92 wheel hub assembly

Really? THAT'S how you ask a question?




WHAT VEHICLE? Kinda guessing 4WD, but from a certain perspective you could be asking about 2WD lug-studs.

6-Lug or 8-Lug hubs? The hub-to-steering knuckle bolts and the entire service procedure is different.

Did you view the sticky thread in this section regarding replacing front hubs?
www.gmt400.com/threads/4wd-hub-replacement.120/

4wd Hub Replacement

Written up by Kawamatt2 Ok guys, heres my little write-up for replacing front hubs/unit bearings and calipers, rotors, pads, and soft lines. This will probably fall by the wayside like all others but at least its not searchable. So, to start out, my front pads were wearing pretty thin and...

www.gmt400.com

 

[tommy loyal]

92 k 1500 6 lug 350 5 speed 3 bolts hold hub on seen 15 mm didn't know size threads or if anybody knew where get any cheaper than $ 38 kinda high for 3 bolts

 

[Schurkey]

GM Part no. 15995614. $7 each when Obummer was still President. $16/each on Amazon.

Amazon says Dorman 917-507 should work, pack of three, $24.
www.amazon.com/Dorman-917-507-Bearing-Mounting-Bolts/dp/B01ID3P76C/ref=sr_1_1?crid=45Z2U1ZTTTO5

xc_hide_links_from_guests_guests_error_hide_media

They are NOT "15mm bolts". They have a 15mm hex head.

If you use anti-seize or any other thread lube, reduce the torque by 10--20 percent.

 

[Komet]

You can use digital calipers and a thread pitch gauge to find the size of any bolt.

 

[Caman96]

I used those Dorman bolts…there I said it, not proud of it. Hope they hold up. I actually have a spare box down my basement somewhere as amazon sent an extra box of 3.

 

[454cid]

I have a mixture of dealer and Dorman bolts.