Dr.Zoom
Hi Tech Redneck
- Joined
- Jun 9, 2014
- Messages
- 1,170
- Reaction score
- 201
Maybe play with the spacing more though where you find it looks the best. I'd try down some and forward a little.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ya, I already got the molding off with a heat gun and fishing line but the last owner had damaged the paint underneath when he replaced part of itJust a hint, to remove emblems and mouldings without damaging paint, mono filiment fishing line will cut them off by pulling back and forth without hurting paint or emblems.
I did mine the same way. There was damage on the driver's door under the molding I didn't know about till the molding pulled the paint off and a little bit of fiberglass. Luckily a friend of mine that has been painting cars for over 60 years fixed that and painted the rolled pan. Problem solved.Ya, I already got the molding off with a heat gun and fishing line but the last owner had damaged the paint underneath when he replaced part of it