Just a followup -
Got all of the new parts installed after flushing the evaporator and hoses. Then evacuated the system for 2 hours. Put 4oz PAG46 oil in the compressor and 4oz in the receiver.
New parallel flow condenser
New AC Delco compressor. When I disconnect the high pressure switch (white wires) I wired in series with the low side, it shuts off just like I knew what I was doing, lol.
Let it run for about 10 minutes at idle to let the oil disperse in the system then, took it out for a drive - nice cold air. Even heard the fresh air door cycle ~30 seconds after starting it up with fan on high. Now, let's see how long this one lasts!
Got all of the new parts installed after flushing the evaporator and hoses. Then evacuated the system for 2 hours. Put 4oz PAG46 oil in the compressor and 4oz in the receiver.
New parallel flow condenser
You must be registered for see images attach
New AC Delco compressor. When I disconnect the high pressure switch (white wires) I wired in series with the low side, it shuts off just like I knew what I was doing, lol.
You must be registered for see images attach
Let it run for about 10 minutes at idle to let the oil disperse in the system then, took it out for a drive - nice cold air. Even heard the fresh air door cycle ~30 seconds after starting it up with fan on high. Now, let's see how long this one lasts!