98 GMC Crew Cab Dually

[Supercharged111]

Is that the only one? 400 grit paper, shoe string, new bearing, pretend the mains are perfect, send it.

I did this with some WD40 to polish a crank before. That motor held up fine.

 

[618 Syndicate]

We'll see how good he can get it.

 

[fancyTBI]

Shít man. That sucks to hear.

 

[Dropped88]

It's polished gonna go back with 400 but I want to mic it first has a little ridge, want to make sure it's not egged

that line in the center is the ridge

 

[ROYALTYFORGE]

Any updates on this big girl?

 

[618 Syndicate]

Struggled to find a machine shop to turn the crank, so it wasn't done in time for our show yesterday. The conversation now is what else we're gonna do while he's got it.

 

[BNielsen]

Got any pics of the headers installed? I thought you had some posted but I couldn't remember where.
I'm excited and nervous to tear into the core 454 for the K2500, hopefully it's just a bad head gasket not a cracked head or any further damage that'll complicate the rebuild.

 

[618 Syndicate]

Got any pics of the headers installed? I thought you had some posted but I couldn't remember where.
I'm excited and nervous to tear into the core 454 for the K2500, hopefully it's just a bad head gasket not a cracked head or any further damage that'll complicate the rebuild.

I thought I posted some too, but I guess not. I'll ask @Dropped88 if he can post some once he gets it back together.

 

[Dropped88]

I'll look if I have one but I can get them. I believe I have some on the 8.1 where you can see how they sit in the frame rails cause the clips off

 

[618 Syndicate]

Got any pics of the headers installed? I thought you had some posted but I couldn't remember where.
I'm excited and nervous to tear into the core 454 for the K2500, hopefully it's just a bad head gasket not a cracked head or any further damage that'll complicate the rebuild.

This is @Dropped88 truck which is 8.1 swapped, but the headers and truck are the same.