Hey y’all, figured I’d post a thread mostly for input but to have somewhere to keep a documentation of my build. If you go to the introductions I have most details posted up there so I won’t go into detail here.
Quick run-down, as the title states the truck, she’s a 5.7L with a 4L60e (do I swap it or nah? NV..?)
You must be registered for see images attach
You must be registered for see images attach
Not looking for it to be an absolute off-road’r as I have other toys for that (IH8mud member) but I’m going to get it some advantage for when the time comes. I’m currently installing a SkyJacker 2-2.50” lift kit and she’s getting some new 34” Interco TSL SS. I have mostly everything ripped off the front end just waiting on my stuff to get back from powder coating.
You must be registered for see images attach
Here’s some of what I have so far done. I pulled basically a whole front end out of a salvage yard truck and now that’s getting the same treatment^.
You must be registered for see images attach
(Read my “Introduction” post for more details.)
It seems this lift has never been done from what I can tell scanning the forum and maybe y’all will hate me for doing it! But I’ll most pictures as it goes back together, so far I’m happy with the quality of parts from SkyJacker. I wish I had more photos to post of it to show where I’m at with everything.
You must be registered for see images attach
My boys from the north will understand what’s going on here, this truck came from Indiana.
Also the rack you see on the back is something I found at the salvage yard then fab’d it up a little for my usage.
You must be registered for see images attach
Hope y’all enjoy the read, I’ll try and keep things updated even if I’m the only one reading, at this point I’m taking any advice I can use. Like I said, this ain’t no bog truck or pebble climber but anything to enhance the performance off-road.
Bryce,
Sent from my iPhone using Tapatalk