Mine is about 4-5" not sure cause the springs are sagging. I have a pic somewhere when I first got it, looks like the motor is out cause sits higher in the front. I cut a coil and put lowering shackles in the rear, and springs are in the highest position, aka most drop. Believe those are about 2-3", so with sagging springs and those guessing 4-5" lol. I'd have to get a pic on level ground how it sits, but sits a tad lower than the pic I posted. I'd have to look at mine again, but my filler hose is right behind the shackle/spring, didn't even notice/pay attention to where it went when I was under there....