Next: Brake System Overhaul
I did this at the same time as Hydroboosting.
• New front calipers - AC Delco, reman., uncoated. Selected for cost effectiveness, PN #: 18FR746 &
• New front pads - Raybestos EHT369H, friction code GG
• Cleaned up rotors with emery cloth, re-used. They had <20,000kms, still good condition, Raybestos Element 3 (solid, not slotted) if I remember right.
• New 11" drums - Raybestos, PN #: 2169R
• New drum brake hardware kits - AC Delco
• New wheel cylinders - AC Delco Professional, PN #: 18E292
• New shoes - Centric HD, PN #:11204730
• All new parking brake cables, cable equalizer, cable connector. AC Delco Professional & GM Genuine.
• New Russell braided SS brake line kit.
• Inspected all brake lines, all looked OK, cleaned up rust spots with sand paper.
• New fluid - Flushed brake lines until it ran clear fluid at each corner.
You must be registered for see images attach
You must be registered for see images attach
I left the RWAL system in place for now... I (still) have a solid brake warning light on which i have yet to diagnose. I would also like to bleed my ABS combo valve. Anyone done this successfully?