mfisher1987
Newbie
- Joined
- Sep 8, 2015
- Messages
- 7
- Reaction score
- 0
Hey guys this is my very first post so I'm sorry if I posted in the wrong section. So first off I want to purchase autometer fuel pressure gauge # 2660. What do I need to be able to plumb this into my fuel lines? There is no test port correct? Now my next issue is why I want the fuel pressure gauge and that is that about 2 months ago I let my truck sit for a few days and went to start it and it fired right up and then died. I sat there and cranked on it for a good while and it did not attempt to want to fire up. I could hear the fuel pump prime but I cant check spark by myself. By the time my brother got over with his scan tool and spark tester it fired right up. two weeks later it did the exact same thing and fired right up as soon as i got someone over to look at it. now just the other day I went to drive it after it had sat for a few days and it started up and I drove for a few miles and it died while i was driving. I was able to coast into a parking lot and I would crank on it and it would fire up for a few seconds and die and then it did that a few times until it stayed running and I have been driving it every since. A year and a half ago I put all new plugs, wires, distributor (included ignition control module), and coil on it. any ideas what this could be?